Aggregate Driveway Sealing in Franklin and South Nashville
Our driveway-sealing service is for aggregate concrete only. We apply a two-coat acrylic seal. Asphalt sealcoating is not offered under this service. Send a close-up of the driveway surface if you are unsure whether it is exposed aggregate.

Confirm the driveway is aggregate concrete
Exposed aggregate has visible stones in the concrete surface. A broad search for driveway sealing can also return asphalt contractors, but that is a different service. This page is specifically about our aggregate-concrete offering, not asphalt, pavement repair or resurfacing.
Previous sealer and surface condition matter
Tell us when the driveway was last sealed, what product was used if known, and whether there are cloudy areas, peeling coating or other concerns. Ask how preparation, the proposed finish and return-to-use timing will be handled for this driveway. Do not assume that cracks, deep stains or drainage problems are repaired by sealing.
Related work for your home
Explore Driveway Cleaning, Concrete and Sidewalk Cleaning, Paver Cleaning and Sealing. Request a written quote for the surfaces you need.
Questions before you book
Do you seal asphalt or plain-concrete driveways?
No. Our driveway-sealing service is limited to exposed-aggregate concrete. Asphalt sealcoating and sealing plain concrete are outside this published scope. Exposed aggregate has visible stones in the surface; send a close-up if you are unsure what your driveway is made of. Include an overall photo as well, so the entrance, parking areas and any different materials can be identified before a quote is prepared.
How many coats are included in aggregate driveway sealing?
Our published service is a two-coat acrylic seal. Ask the written quote to identify the actual product, preparation and included areas so you can compare the same work across estimates. Two coats do not mean that every old coating can be covered without review. Share what was applied previously, if known, and photograph cloudy, peeling or patchy sections before the new sealing scope is agreed.
Will aggregate driveway sealing repair cracks or damaged concrete?
No. Sealing is not advertised as crack repair or resurfacing. Show cracks, loose areas and damaged edges separately from dirt or ordinary coating wear. The written scope should make clear which preparation and sealing work is included and which concerns need separate attention. A new finish should not be assumed to correct drainage, replace concrete or make an existing structural problem disappear.
How much does aggregate driveway sealing cost in Franklin?
We offer a free, flat-rate written quote for your requested driveway work. The site does not publish one sealing rate or a Franklin average. Send the address, a full driveway photo, close-ups of the finish and approximate dimensions if known. Identify previous sealer, access restrictions and any additional areas you want quoted. Compare preparation, product, two-coat application and exclusions before treating two estimate totals as equivalent. Sources: Exterior-cleaning quote guide.
How often should an exposed-aggregate driveway be resealed?
There is no fixed interval promised for every driveway. Review how the finish looks now as well as when it was last applied. Our aggregate-sealing guide asks homeowners to show cloudy, peeling or patchy areas and discuss wear and the proposed product’s instructions. Send those photos before requesting another coat; coating age alone does not establish that the surface is ready or that the previous finish is compatible. Sources: Aggregate driveway-sealing guide.
How long after driveway washing can aggregate sealing begin?
Sealing should begin when the surface meets the selected product’s preparation requirements. A wash date alone does not establish readiness. For example, Ghostshield’s Cryli-Tek 5505 directions require a dry substrate, prohibit application over visible standing water and give product-specific moisture guidance. That is an example, not a declaration that we use that sealer. Confirm the proposed product and drying conditions for your driveway before scheduling application. Sources: Ghostshield Cryli-Tek 5505 instructions.
Is exposed-aggregate driveway sealing worth considering?
Consider the finish you want and whether the existing surface is suitable. Our service is specifically for aggregate concrete with a two-coat acrylic seal, and the quote should identify the expected appearance and preparation. Manufacturer finishes differ: Ghostshield describes one acrylic as high-gloss and wet-look while another has a matte or satin finish. Confirm the proposed product; acrylic does not by itself establish the sheen your driveway will receive. Sources: Ghostshield Cryli-Tek 5505 instructions.
Can an exposed-aggregate driveway be resealed over its old coating?
The previous sealer and its condition need to be reviewed before another application. Identify the old product if known and show peeling, cloudy or uneven areas. Ghostshield’s Cryli-Tek 5505 instructions describe particular reapplication conditions for compatible coatings; those conditions should not be transferred to an unidentified product. Ask the written scope to explain how the existing finish will be handled before agreeing to another sealing visit. Sources: Ghostshield Cryli-Tek 5505 instructions.
Can driveway cleaning and aggregate sealing be quoted together?
Yes, request both services and have the written scope identify each. Driveway cleaning is available separately, and aggregate sealing is not automatically included with a cleaning job. Show the full footprint, adjacent walks you want considered and close-ups of stains or old coating. Cleaning does not promise complete stain removal, and a cleaned surface still needs to meet the proposed sealer’s preparation requirements before coating. Sources: Driveway cleaning.
Can an aggregate driveway be sealed when rain is forecast?
Check the selected sealer’s weather requirements before application. There is no universal rain-safe time on our service page. For example, Ghostshield’s Cryli-Tek 5505 directions exclude application when rain is expected within twelve hours, but another product may differ. Confirm the actual sealer and forecast for this job, along with separate walking and vehicle-use instructions, rather than borrowing a schedule from another driveway or assuming touch-dry means ready for traffic. Sources: Ghostshield Cryli-Tek 5505 instructions.
Ready to make it look new again?
Tell Ryan what you have in mind. Get a free, written quote for the work your home needs.
- A flat-rate written quote
- Clear scope before scheduling
- A final walkaround before payment
Rather talk it through? Call (615) 267-3733 or send a text.
Prefer email? Ryan@coolsprings-pw.com