Paver Cleaning and Sealing in Franklin and South Nashville
Paver cleaning and sealing addresses the individual units, their surface and the joints between them. Tell us the paver material, any previous sealer and the appearance you want. Do not assume that a product intended for one paver system is suitable for every stone or paving material.

Cleaning and sealing need separate decisions
Existing sealer, joint condition, surface buildup and possible efflorescence affect the conversation. Belgard cautions that pressure washing can damage a paver surface and advises following product directions. That guidance is a reason to identify the material and proposed treatment rather than promise a universal process.
Choose the finish with the actual paving in mind
Discuss appearance, prior products and the intended use of the area before selecting a sealer. Re-sanding, leveling, replacing pavers and correcting drainage are not automatically part of cleaning and sealing. Ask for each included task, product and return-to-use instruction in the written quote.
Material care reference
Read Belgard’s paver maintenance guidance for manufacturer cautions. This reference does not imply certification or that every paver material uses the same process.
Related work for your home
Explore Patio Cleaning, Pool Deck Cleaning, Aggregate Driveway Sealing. Request a written quote for the surfaces you need.
Questions before you book
Can the same sealer be used on every type of paver?
No. Concrete, clay, porcelain and natural stone should not be treated as interchangeable materials. Belgard distinguishes concrete and porcelain care, while sealer labels identify suitable substrates. Share the paver manufacturer and product name if known, along with photos and any previous coating details. The proposed sealer needs to suit that surface and the existing finish. A product described as a paver sealer is not automatically appropriate for everything in your patio or walkway. Sources: Belgard paver care guidance.
Can pressure washing damage pavers or disturb their joints?
Yes, an unsuitable method can damage the surface or disturb joint sand. Belgard warns that forceful spray can expose aggregate on its pavers. Show loose joints, washed-out sand, sunken blocks and previously repaired areas before the cleaning scope is agreed. Those conditions affect what should be discussed before work; cleaning does not automatically include replacing sand, resetting pavers or correcting drainage. Identify the installed material so its own care instructions can guide that discussion. Sources: Belgard paver care guidance.
Do pavers have to be sealed after they are cleaned?
No. Cleaning and sealing are separate decisions. Unilock states that its concrete pavers do not require regular sealing, while Rochester explains that some products already have factory protection. Those examples show why the installed paver matters. Consider its care instructions, any previous sealer, the appearance you want and the maintenance the proposed finish requires. Ask what sealing would add to your particular surface rather than assume every cleaned patio needs another coating. Sources: Unilock paver sealing guide; Rochester paver protection guide.
How much does paver cleaning and sealing cost?
We provide a free, flat-rate written quote for the requested work. The area, paver material, access, stains, joint condition and previous sealer help define the project; no universal paver-sealing price is published. Send wide photos and close-ups of worn joints or old coatings. Confirm whether the estimate covers cleaning alone or cleaning and sealing, which finish is proposed, and whether any separate preparation or repair work is included before comparing quotes. Sources: Exterior-cleaning quote guide.
Should pavers be sealed immediately after pressure washing?
Not automatically. Washing is only one part of preparing a surface for sealer. Existing stains, efflorescence, previous coatings and joint conditions may need attention under the chosen product’s instructions. Alliance Gator specifically says pressure washing alone is not sufficient preparation for its sealing system. That does not prescribe the same cleaner for every paver. Confirm the preparation included in your quote before scheduling sealing; do not assume washing has resolved every coating or joint issue. Sources: Alliance Gator sealer guidance.
How long do pavers need to dry before they can be sealed?
The pavers must meet the drying and weather requirements of the specific sealer. Shade, recent rain and moisture in the joints can affect readiness, so a generic number of hours is unreliable. Alliance Gator requires thorough drying for its system, with timing that depends on its product and preparation instructions. Ask which product will be used and what conditions it requires. Drying before application and the wait before walking or driving afterward are separate requirements. Sources: Alliance Gator sealer guidance.
Is joint sand replacement part of paver cleaning and sealing?
Only when the written quote includes it. Our published paver service separates cleaning and sealing from re-sanding, leveling, replacement and drainage correction. Belgard also describes keeping joints topped off as part of caring for its paving system. Show gaps, washed-out joints or movement when requesting a quote, and ask whether any needed joint work is available and included. A sealer’s ability to stabilize suitable sand does not mean missing sand or shifted pavers have been repaired.
Will paver sealer make the surface darker or glossier?
It can, depending on the selected finish. Alliance Gator describes wet-look and satin products that deepen color, alongside products intended to retain a more natural appearance. Those are product examples, not a promise that all sealers look alike. Tell us whether you want to keep the current appearance or discuss a richer finish. Confirm the exact product and whether an inconspicuous test is appropriate before committing to the full surface; wet pavers alone are not a finished-sealer sample. Sources: Alliance Gator sealer guidance.
Can a contractor apply new sealer over an existing coating?
Compatibility needs to be checked first. Alliance Gator distinguishes its own water-based and solvent-based systems and warns against some combinations; those instructions do not establish compatibility with an unknown coating. Share the previous product name and application date if available, and show peeling, haze or uneven wear. Ask how existing sealer will affect preparation and the written scope. A new coat should not be assumed to hide defects or bond successfully over every previous finish. Sources: Alliance Gator sealer guidance.
How often should paver sealer be reapplied?
Use the installed paver and sealer guidance, together with the condition of the finish. Traffic, exposure and product type can affect when reapplication is appropriate. Belgard discusses a three-to-five-year interval for its guidance and warns that sealing too often can create haze; Alliance Gator gives different guidance for different products. Those examples are not a maintenance schedule for your property. Keep the product details and ask about upkeep when choosing the finish rather than arrange automatic annual recoating. Sources: Belgard sealing maintenance guidance; Alliance Gator sealer guidance.
Ready to make it look new again?
Tell Ryan what you have in mind. Get a free, written quote for the work your home needs.
- A flat-rate written quote
- Clear scope before scheduling
- A final walkaround before payment
Rather talk it through? Call (615) 267-3733 or send a text.
Prefer email? Ryan@coolsprings-pw.com